The Bush Winch is a light weight self-recovery system for 4WDs and 2WDs.
When needed the Bush Winch is simply connected to the front or rear wheels of your vehicle as you chose.
With the winch rope attached to the Bush Winch at one end and the..
anchor point at the other the winch rope winds onto the Bush Winch as the wheel spins.
You can chose to go backwards or forwards until you are pulled onto firm ground again.
Take the Bush Winch off again when finished and store it and the winch rope in the kit bag.
The Bush Winch connects and disconnects simply by hand without any tools and the winch rope is very strong,
soft to touch,
light weight and easy to handle.
Com: Terence : Couple of old wheel rims with a bit of work then it depends on how clever you want the wheel fittings to be.
Com: Tyler belec : This would ONLY work if your tire was in a constant state of slipping out.
If the outside diameter of the tire was 2ft.
and the outside diameter of the spool was 1ft.(for arguments sake) One full rotation of a 2ft diameter wheel would cover 6 feet 3 inches.
One rotation of the spool would consume roughly 3 feet 1 inch of the rope.
THERE FOR, every time your vehicle achieves traction for one rotation of the tire, you put 3ft of slack into your cable.